Windows 2008 Nic Teaming How To Configure

This department describes how to use the NVIDIA Network Access Director to configure teaming of NVIDIA network interface ports on systems equipped with the Windows 2003 and Windows 2008 operating systems.

Using the NVIDIA Network Admission Managing director for Windows Server 2003

If y'all elect to practice a custom installation of Sun supplemental software, you tin select NVIDIA Network Access Manager (NAM) to be installed on your Sun server. When installed, you lot can employ NAM features to optimize your server's network performance, increase its network bandwidth and provide for optimal throughput in example 1 of your network adapters stops performance.

The NVIDIA Network Access Manager software includes:

• Ethernet setup: This tool allows you to configure the settings for your NVIDIA integrated network interfaces to best adapt to your network configuration.

• Teaming: This tool allows you to combine all the NVIDIA Ethernet interfaces on your system to course a team, resulting in increased bandwidth and network fail-over redundancy. In addition, you have the capability to configure TCP/IP dispatch that off-loads the processing of TCP/IP network traffic from your computer'due south CPU to its NVIDIA hardware resulting in greatly improved organisation operation.

  
  

  ---

  Note - The TCP/IP Dispatch off loading policy is defined using the NVIDIA Network Admission Director (NAM). Its functionality is disabled by default. When TCP/IP acceleration is enabled, all TCP/IP connections are off-loaded. If you accept a software firewall installed on your organisation, enabling TCP/IP Acceleration technology might cause some network traffic to featherbed your firewall. A alarm message indicating this is displayed when a user enables TCP/IP acceleration.

  ---

  
  

• FirstPacket: This tool allows you to manage the traffic on your server and better the performance of user-specified applications, such as networked games, Phonation-over-IP (VoIP), and other applications that are sensitive to network delay (latency).

  
  

  ---

  Note - You can non use both NVIDIA FirstPacket and NVIDIA Teaming at the aforementioned fourth dimension. You lot can only configure your server to use i or the other.

  ---

  ---

  Notation - To determine which network interface ports are active on your system, use the ipconfig /all DOS command, or the Windows Network Connections managing director. For more than information, run across the Service Transmission for your server.

  ---

  
  

To Launch the Network Access Manager

To access the functions available for your server's network interface, do the post-obit at your server one time NAM has been installed:

1. From your Windows taskbar, click Commencement, and then click Programs.

2. Open the NVIDIA Corporation program group, click the Network Admission Manager binder, and then click Web-based Interface.

   The Network Admission Director screen appears (Effigy 8-5). You lot can use it to setup teaming for two or more network interface ports.

   FIGURE eight-5   Windows Server 2003: Network Admission Managing director Screen

   

3. For example, if yous wanted to set up NIC teaming, you would click the Teaming link.

   The Teaming wizard starts.

4. Select Enable from the Teaming Configuration drop-down menu, and and then click Apply. Refer to Effigy 8-six.

   The unpopulated Teaming Table appears in the Network Admission Manager screen.

   FIGURE eight-6   Teaming Wizard Screen

   

5. To select the network interfaces to team, and configure the teaming options, click the Create Squad button.

   The wizard displays the network interfaces bachelor for teaming (see Effigy eight-seven) in the Network Access Manager screen.

   FIGURE 8-vii   Network Interface List

   

6. From the bachelor list of Ethernet Interface Names, add available interfaces to the squad by clicking the Add icon. You can have two or more interfaces in a team.

7. Afterwards selecting the interfaces to be teamed, click the Next button (located at the lesser of the screen).

   The wizard guides you lot through the configuration and setup of your team.

   
   

   ---

   Annotation - Once you confirm the team to be created, you lot must restart the server'south network interface and Network Access Manager to configure the new settings.

   ---

   
   

Learning More About Network Admission Director

For more than information about using NVIDIA networking options through either the spider web-based or CLI interface, refer to the documentation and online help installed with the product.

Using the NVIDIA Network Command Panel for Windows Server 2008

If you elect to do a custom installation of Dominicus supplemental software, you can select NVIDIA Network Access Manager (NAM) to exist installed on your Lord's day server. When installed, you tin use NAM features to optimize your server'south network operation, increment its network bandwidth and provide for optimal throughput in example ane of your network adapters stops performance. For Windows Server 2008, NVIDIA Ethernet settings are washed through the NVIDIA Command Panel.

The NVIDIA Control Panel software is used to set upward network interface Teaming. This tool allows y'all to combine all the NVIDIA Ethernet interfaces on your system to class a team, resulting in increased bandwidth and network failover redundancy.

---

Note - To make up one's mind which network interface ports are active on your system, utilize the ipconfig /all DOS command, or the Windows Network Connections manager. For more data, see the Service Transmission for your server.

---

To Launch the NVIDIA Control Panel

To admission the functions available for your server's network interface, do the following at your server one time NAM has been installed:

1. From your Windows taskbar, click First, so click Programs.

2. Open the NVIDIA Corporation program group, click the NVIDIA Command Panel folder, and and then click Command Panel. The NVIDIA Control Console appears.

   The program prompts you to select the Standard or Avant-garde interface. You lot tin setup teaming for two or more network interfaces. An example of the Avant-garde interface is shown in Figure eight-8.

   FIGURE eight-8   Windows Server 2008: NVIDIA Control Panel Screen

   

3. For instance, if yous wanted to set up up NIC teaming and select your On settings, instead of the using the optimal defaults, you would select Utilize Custom Teaming Configuration.

   The Custom Teaming Configuration wizard starts and displays the network interfaces available for teaming (see Effigy 8-ix).

   Figure 8-9   Ethernet Teaming List

   

4. Select the network interfaces you wish to squad, and then click

   The wizard guides yous through the configuration and setup of your squad.

Learning More Well-nigh NVIDIA Control Console

For more information well-nigh using NVIDIA networking options refer to the documentation and online assistance installed with the product.

Source: https://docs.oracle.com/cd/E19432-01/820-1120-22/chapter8.html

Posted by: ortiztaide1983.blogspot.com

Share this post